Lowbrow Customs DIY Motorcycle Fender Mounting Strut Kit 2.0

We designed and made our DIY Fender Strut Kit many years ago and decided it was about time we offered an alternative style. Included with this kit are the following pieces:

(2) Oval, mild steel upper tabs, 1/4″ thick, with 5/16″-18 threaded holes
(2) Mild steel upper tabs, 3/16″ thick, with two 5/16″ holes
(2) Lower mild steel tabs, 3/16″ thick, with one 5/16″ hole
(2) Pieces 1/2″ thick Cold Rolled Steel, each 18″ long

The oval tabs are designed to be welded to the side wall of a rear motorcycle fender. They can be welded inside the fender to keep them hidden, having first drilled holes for the hardware to pass through. The upper and lower strut tabs weld to the supplied 1/2″ diameter, cold-rolled steel to make fender struts. Cut to length and bend (if desired) as needed. This entire setup gives a very strong, durable and reliable fender support. Using whatever style (hex head, button head allen, etc) 1/2″ long hardware desired will secure the strut to the fender without having to put a nut to the inside. Alternatively, a slightly longer bolt and a half-thickness jam nut can be used (along with thread locker) for even more security. Everything included is mild steel, easy to weld, and Made in the USA!